تفکیک زنبورهای گرده‏ افشان قبیلۀ Anthophorini (Hymenoptera: Apidae) موجود در موزۀ حشرات گرده‏ افشان دانشگاه یاسوج به روش ریخت‏سنجی هندسی

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشجوی کارشناسی ارشد حشره‌شناسی کشاورزی، گروه گیاه‌پزشکی، دانشکدۀ کشاورزی، دانشگاه یاسوج، یاسوج، ایران

2 دانشیار حشره‌‌شناسی کشاورزی، گروه گیاه‌پزشکی، دانشکدۀ کشاورزی، دانشگاه یاسوج، یاسوج، ایران

3 استادیار حشره‌شناسی کشاورزی، گروه گیاه‌پزشکی، دانشکدۀ کشاورزی، دانشگاه یاسوج، یاسوج، ایران

چکیده

در پژوهش حاضر، نمونه‏ های زنبورهای گرده‏افشان قبیلۀ Anthophorini موجود در موزۀ «حشرات گرده‏افشان ایران» واقع در دانشکدۀ کشاورزی دانشگاه یاسوج بررسی شدند. به‌منظور انجام ریخت‌سنجی هندسی ابتدا نمونه‏ ها تا حد گونه شناسایی شدند و پس‌از‌آن، پنج گونه از زنبورهای این قبیله از سه‌ جنس‌ Anthophora، Amegilla و Habropoda شامل گونه‌های Amegilla quadrifasciata،Anthophora (Melea) yasoujensis، Habropoda tarsata، Anthophora (Lophanthophora) agama و Anthophora (Pyganthophora) rogenhoferi به روش ریخت‏سنجی هندسی بررسی شدند. در بررسی حاضر تعداد 122 نمونه شامل 53 ماده و 69 نر مطالعه شد؛ به‌این‌ترتیب که پس‌از عکس‌برداری دیجیتالی و لندمارک‌گذاری روی بال‌ها، فایل‌های Tps با نرم‏افزار Tps Dig نسخۀ 1/2 به دست آمدند و درنهایت داده‏ های حاصل که شامل عکس‏های لندمارک‌گذاری‌شده بودند به نرم‏افزار MorphoJ وارد شدند و تجزیه‌و‌تحلیل انجام شد؛ خروجی وارد نرم‏افزار PAST نسخۀ 17/2 شد و نتایج به‏ شکل نمودارهای خوشه‏ بندی‌شده نمایش داده شدند؛ به‌این‌ترتیب تفکیک در سطح جنس، زیرجنس و گونه انجام شد. نتایج بررسی حاضر نشان دادند روش ریخت‏سنجی هندسی روشی مؤثر و مفید با انطباق بسیار زیاد با کاراکترهای ریخت‌شناختی برای تفکیک نمونه ‏های هر سه سطح است و ابزار قدرتمندی در جداسازی تاکسون‌های نمونه ‏های این زنبورها به شمار می‌رود.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Seperating Pollintor Bees of the Tribe Anthophorini (Hymenoptera: Apidae) Available at the ‘Iranian Museum of Pollinator Insects’ in Yasouj University, using Geometric Morphometric Method

نویسندگان [English]

  • Zohreh Khajuee Dehshib 1
  • Alireza Monfared 2
  • Hojjatollah Mohammadi 3
1 M. S. Student of Agricultural Entomology, Department of Plant Protection, Faculty of Agriculture, Yasouj University, Yasouj, Iran
2 Associated Professor of Agricultural Entomology, Department of Plant Protection, Faculty of Agriculture, Yasouj University, Yasouj, Iran
3 Assistant Professor of Agricultural Entomology, Department of Plant Protection, Faculty of Agriculture, Yasouj University, Yasouj, Iran
چکیده [English]

Abstract
In this study, specimens of pollinator bees of tribe Anthophorini available in the ‘Iranian Museum of Pollinator Insects’, located at the Faculty of Agriculture, Yasouj University were studied. In order to perform geometric morphometric analysis, firstly specimens identified to species level. Then after final determinations, five species of bees related to three genera of Anthophora، Amegilla and Habropoda including: Amegilla quadrifasciata, Anthophora (Melea) yasoujensis, Habropoda tarsata, Anthophora (Lophanthophora) agama and Anthophora (Pyganthophora) rogenhoferi, were examined by method of geometric morphometric. In this study, 122 specimens including 53 female and 69 male, were examined. Thus, after digital photography and setting of landmarks on the node of wings by using the software Tps Dig version 2.1, output files were used in MorphoJ software, and finally analysis procedure was performed. These final outputs then would enter in software PAST version 2.17, and these later outputs were demonstrated as a tree. Therefore, the separation was carried out in three taxa levels of the, genus, subgenus and species. Results indicated that geometric morphometric method is an effective practical method and useful method with high coincidence with morphologic characters in segregating specimens of all three taxa mentioned level and is a powerful tool in separating taxa of theses bees.

کلیدواژه‌ها [English]

  • Geometric Morphometric
  • Pollinator Bees
  • Anthophorini
  • PAST
  • MorphoJ
Adams, D. C., Rohlf, F. J. and Slice, D. E. (2004) Geometric morphometrics: ten years of progress following the ‘revolution’. Italian Journal of Zoology 71: 5-16.
Ascher, J. S. and Pickering, J. (2011) Discover Life bee species guide and world checklist (Hymenoptera: Apoidea: Anthophila). Bee species world checklist. Retrieved from http://www.discoverlife.org/mp/20q?act=x_checklist&guide=Apoidea_species. On 25 June 2017.
Brooks, R. W. (1988) Systematics and phyligeny of the Anthophorine Bees (Hymenoptera: Anthophoridae, Anthophorini). The University of Kanzas science Bulletin 53(9): 436-575.
Falamarzi Sh. (2017) Faunistic survey of Megachilidae (Hymenoptera) and wing geometric morphometry study in Megachile spp. with particular reference on principal component analysis (PCA) in south of Fars province. PhD thesis, Shahid Chamran University, Ahwaz, Iran (in Persian).
Francoy, T. M., Prado, P. R. R., Goncalves, L. S., Costa, L. F. and Jong, D. D. (2006) Morphometric difference in a single wing cell can discriminate Apis mellifera racial type. Apidologie 37:91-97.
Friese, A. H. (1896) Species aliquot novam vel minus cognitae generis podalirius lata, (Anthophora aut.). Termeszetrajzi fuzetek: 265-269.
Güler, Y. and Çağatay, N. (2006) Faunistic study on Megachilini, Osmiini and Anthidiini tribes (Hymenoptera: Megachilidae) in Central Anatolia. Journal of the Entomological Research Society 8(2): 15-34.
Khaghani Nia, P., Mohammadi, S. A., Sarafrazi, A., Haddad Iraninejad, K., Ebrahimi, A., Alawi Kia, S. and Zahiri, R. (2009) Study of sexual dimorphism of codling moth; Cydia pomonella (Lep. Tortricidae) using geometric morphology in northwest of Iran. Journal of Entomological Society of Iran 28(1): 62-51 (in Persian).
Klein, A. M., Vaissiere, B. E., Cane, J. H., Steffan-Dewenter, I., Cunningham, S. A., Kremen, C. and Tscharntke, T. (2007) Importance of pollinators in changing landscapes for world. crop. Proceedings of Royal Society 274: 303-313.
Klingenberg, C. P. (2011) MorphoJ: an integrated software package for geometric morphometrics. Molecular Ecology Resources 11: 353-357.
Marcus, L. F. (1990) Traditional morphometrics. In: Proceedinge of the Michigan morphometric workshop (Eds. James Rohlf, F. and Bookste, Fred L.) 77-122. The University of Michigan Museum of Zoology.
Michener, C. D. (2007) The bees of the worlds. The Johns Hopkins University Press, New Yourk.
Mitteroecker, P. and Gunz, P. (2009) Advances in geometric morphometrics. Evolutionary Biology 36: 235-247.
Nawrocka, A., Kandemir, İ., Fuchs, S. and Tofilski, A. (2017) Computer software for identification of honey bee subspecies and evolutionary lineages. Apidologi. Retrieved from https://doi.org/10.1007/s13592-017-0538-y. On: 14 June 2017.
Rohlf, F. J. (2002) Geometric morphometrics and phylogeny. In: Morphology, shape and phylogenetics (Eds. MacLeod, N. and Forey, P. L.) Taylor and Francis, London.
Smith, D. R., Crespi, B. J. and Bookstein, F. L. (1997) Fluctuating asymmetry in the honey bee, Apis mellifera: effects of ploidy and hybridization. Journal of Evolutionary Biology 10: 551-574.
Schwarz, M. and Gusenleitner, F. (2001) Beitrag sur Kenntnis paläarktischer Anthophorini und Habropodini (Hymenoptera: Apidae). Entomofauna 22(6): 53-92.
Tomkins, J. L. and Kotiaho, J. S. (2001) Fluctuating asymmetry. In: Encyclopedia of life sciences (Eds. Tomkins, J. and Kotiaho, J. S.) 1: 1-5. Stockton Press, London.
Yuksel, S. and Tuzun, A. (2011) Use of wing morphometry for the discrimination of some Cerceris (Insecta: Hymenoptera: Crabronidae species). African Journal of Biotechnology 10(80): 8569-18580.
Wappler, T., De Meulemeester, T., Aytekin, A. M., Michez, D. and Engel, M. S. (2012) Geometric morphometric analysis of a new Miocene bumble bee from the Randeck Maar of southwestern Germany (Hymenoptera: Apidae). Systematic Entomology 37: 784-792.
Webester, M. and Sheats, H. D. (2010) A practical introduction to landmark-based geometric morphometrics. The Paleontological Society 16:163-188.
Williams, P. H. (2007) The distribution of bumblebee colour patterns world-wide: possible significance for thermoregulation, crypsis, and warning mimicry. Biological Journal of the Linnean Society 92: 97-118.